SafetyGlassPlus SGP Ionoplast interlayer Film (Super Clear) for Structural laminated safety glass made in China Thickness:0.76mm Width:1650mm, 2000mm or 2440mm Liner length per roll:50M, 100M, 150M or 200M Thickness:1.14mm Width:1650mm, 2000mm or 2440mm Liner length per roll:50M, 100M, 150M or 200M
Peter Lin cnc@cncGlass.com Whatsapp: +86 15013829504 WeChat: wecan365 Mobile: +86 15013829504 www.cncglass.com
SGP Ionoplast interlayer(Super Clear) for Structural laminated safety glass made in China
SGP INTERLAYER Made in China, Not Dupont, Not Kuraray, but China Brand
SGP ionoplast Interlayer for Structural Laminated Safety Glass
SGP: 100 times stiffer and 5 times stronger than PVB used as anti-explosion or anti-hurracane solution
Made In China
Replacing“Dupont”Kuraray SGP
Color: Super clear
Thickness:0.76mm
Width:1650mm, 2000mm or 2440mm
Liner length per roll:50M, 100M, 150M or 200M
Thickness:1.14mm
Width:1650mm, 2000mm or 2440mm
Liner length per roll:50M, 100M, 150M or 200M
Recipe of Heating SGP INTERLAYER Laminated Glass in EVA Vacuum Ovens
Please note that Not all EVA vacuum oven can laminate SGP interlayer, some can, some can not.
【1】The EVA ovens may work slightly differently, so you need to do some adjusting by yourselves based on real situations.
【2】Vacuum pressure: should be stronger than 101 kPa
【3】Low temperature stage:
Cold vacuuming for 5 mins
10mins heating up to 65℃
Holding at 65℃ for 30mins
【4】High temperature stage(Cooking time) : at 135 degrees C for 3.5 hours
【5】Always put only one piece of pre-SGP laminated glass per vacuum bag, you can not stack or place multiple pieces in one bag(or you may have bubbles problem).
The above data is based on [6mmGLASS+0.76mmSGP+6mmGLASS], if you laminating thicker interlayer or thicker glass, please keep the same temperature, but prolong the holding time for high temperature stage by 10-30mins.
Contact us, if you need help:
Peter Lin
cnc@cncGlass.com
Whatsapp: +86 15013829504
WeChat: wecan365
Mobile: +86 15013829504
www.cncglass.com
Autoclave Heating Cycle Recipe of SGP Laminated Glass Process Guide
【1】Laminating room:
Temperature: 22°C – 28°C Humidity: 18% – 28%
【2】Rolling: the glass surface temperature after rolling should be:63±8℃
【3】Autoclave:
Temperature:135°C(no over 137.8℃) Pressure:180–200psi (12–14 bar) Time:60 minutes(can be longer) Cooling speed:3℃/MIN
Datasheet of SGP Interlayer
Item
CNC SGP
Certification of Detection
Kuraray SGP
Certification of Detection
Tear Strength
165.4KN/m (1.54mm)
ASTM D-624
50MJ/m³ (2.3mm)
ASTM D-638
Tensile Strength
37.7Mpa
ASTM D-638
28.1Mpa
ASTM D-638
Elongation at Break
330% (1.54mm)
ASTM-412
400% (2.3mm)
ASTM-412
Proportion
0.95
ASTM-792
0.95
ASTM-792
Haze
<0.3%
JC/T 2166-2013
<0.2%
JC/T 2166-2013
Yellow Index
<1.5
JC/T 2166-2013
<0.7
JC/T 2166-2013
Refractive Index
1.5
JC/T 2166-2013
1.5
JC/T 2166-2013
Transimittance
88%
JC/T 2166-2013
89%
JC/T 2166-2013
UV Block
99.90%
GB15763.3-2009
99.90%
GB15763.3-2009
Moisture Content
<0.08%
JC/T 2166-2013
<0.2%
JC/T 2166-2013
Knock Value
≥7
JC/T 2166-2013
≥7
JC/T 2166-2013
Melting Point
470℃
ASTM D-1929
470℃
ASTM D-1929
Thermal Contraction
≤3%
JC/T 2166-2013
≤3%
JC/T 2166-2013
If you want to order, please simply send us an email.
Silicone rubber sheet for glass industry is a key component of our company dedicated to supporting the glass vacuum laminated furnace according to market demand.
Laminated glass vacuum furnace uses vacuum principle, make the glass heated under vacuum conditions, with the atmospheric pressure, let the glass in the vacuum bag pressed to exclude air and unable to make bubbles, vacuum bag is under heating and vacuum pumped conditions to make two or more pieces of glass and EVA hot together.
Vacuum bag is a core part of glass vacuum laminated furnace, it makes up of two pieces of silicone rubber sheet and silicone sealing edge, silicone rubber sheet is a key component of the entire laminated furnace, its quality directly affects the quality of glass products.
